Detail1. 1pcs 32700_3.2V 6000mA lithium iron phosphate battery for power supply. 2. 1pcs 5V_3W polycrystalline high-efficiency solar panels. 3. 100pcs_0.5W 2835 bright SMD LED_color temperature 5000K (with three lamp holders). 4. 2pcs PIR human body pyroelectric infrared sensor. 5. 1pcs power ON/OFF switch (POWER key). 6. 1pcs function mode selection switch (MODE key). 7. 1pcs red/green/blue three-color indicator light_for product function mode selection indication. 8. The product supports solar charging, light control, and human body induction to trigger lighting functions. 9. PCBA holds lithium battery charge/discharge protection module.
1. The product is equipped with an installation sub-board, which is convenient for users to install and fix the product on any building wall or outdoor bracket.
2. Installation location_Choose a location with sufficient sunlight so that the solar panel can better face the sunlight. 3. Press the POWER button, the solar panel receives sunlight to recharge the lithium battery; at the same time, the product's human body sensor brightness function is turned on. 4. Press the MODE button to select the product function mode, and at the same time the corresponding indicator light is on for 5 seconds and then goes out; indicating the user's function selection. 5. Notice: The product is powered on for the first time, and the default function mode of the program is 1. 6. Red light indication_Mode 1. (The product enters the induction mode, and if someone senses at night, the LED light will be bright for 40 seconds and then turn off). 7. Green light indication_Mode 2. (The product enters the constant light mode, when the day turns to night, the LED light is low brightness_steady light). 8. Blue light indication_Mode 3. (The product enters the sensing mode, when someone senses at night, the LED light is bright for 40 seconds, and the LED light is low brightness_steady on when no one is there).
9. The left and right auxiliary lights can be rotated to the left, right, up and down respectively, which is convenient for user experience and choice of lighting position.
1. Product lumen value:.
LED high brightness: 1000Lm (tolerance ±15%) (approximately equal to 3000MCD); LED low brightness: 250Lm (tolerance ±15%).
2. Product working current: LED high brightness: 2.5A (tolerance ±15%); LED low brightness: 0.85A (tolerance ±15%).
3. Product standby current: ≤ 1mA
4. Product shutdown current: ≤ 5uA
5. Battery life：
Mode 1: 400 cycles (tolerance ±10%) @ fully charged battery 3.6V. Mode 2: 20 hours (tolerance ±10%) @ fully charged battery 3.6V. Solar charging current: 5V_600mA or 4V_800mA @ simulated sunlight intensity of 40,000 LUX direct sunlight. Lithium iron phosphate battery overcharge voltage: 3.65V±0.1V; battery overdischarge voltage: 2.1V±0.1V. PIR sensor detection angle: 0-180 degrees. PIR sensor detection distance: ≧10 meters. Test conditions: @ straight-line distance from the center point, the product is installed at a height of 2.5 meters, the lamp head is tilted down 60 degrees, the height of a person is 1.7 meters, and the ambient temperature is lower than 26°C
10. Lamp head angle adjustment gear: 3.
11. Solar panel angle adjustment gears: 3. Product waterproof: IP65.
